DALI an acronym for Digital Addressable Lighting Interface, is a communication protocol developed specifically for digital lighting control and enables the creation of robust, scalable and flexible systems. The main functions include switching luminaires on/off (individually or in groups), dimming and recalling lighting scenes.
DALI dimmer 1 channel EK-GH1-DL
The 1-channel DALI dimmer EK-GH1-DL permits lighting control of dimmable LED light sources with the help of a KNX (TP) button connected via DALI/KNX Gateway or by another local control device, directly connected to the dedicated input selectable among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 kΩ potentiometer.
The device has a built-in DALI communication bus and it requires a 12, 24 or 48 Vdc auxiliary power supply.
4-channels DALI dimmer EK-GL1-DL
The 4-channel DALI dimmer EK-GL1-DL permits dim-to-warm lighting control of dynamic white, RGB and RGBW of dimmable LED light sources thanks to a KNX (TP) buttons connected via DALI/KNX Gateway or by other local control devices, directly connected to dedicated inputs selectable among normally open buttons, 0 to 10V analog inputs, 1 to 10V analog inputs or 10 kΩ potentiometers.The device has a built-in DALI communication bus and it requires a 12, 24 or 48 Vdc auxiliary power supply.
1-channel DALI dimmer EK-GM2-DL
The 1-channel DALI dimmer EK-GM2-DL allows lighting control of dimmable LED light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway or by another device, directly connected to the dedicated input selectable among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 kΩ potentiometer. The device has a built-in DALI communication bus and it requires a 12, 24 or 48 Vdc auxiliary power supply.
4-channel DALI dimmer 230 Vac EK-GO1-DL
The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway or by another device, directly connected to the dedicated input selectable among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 kΩ potentiometer. The 4 phase-cut outputs (trailing edge) at 230 V are suitable for R-C loads. The device has a built-in DALI communication bus, it is powered by 230 Vac mains voltage and it does not require an auxiliary power supply.
